450 Slc Hydraulic Valve Compensators Noisey
Hello again,
I have now gotten the oil pressure problem solved, 40+ lbs. Now the ball stud hydraulic compensators for the rocker amrs are noisy. Not all the compensators are "pumped" up. Any suggestions. Thanks, WFS: |
If you intend to keep the car, the fix would be to check the cams and rockers for wear and replace if needed, and replace the ball studs.
You might get away with increasing the pre-load on the ball studs with thicker shims. Do a search on 'hockey puck' or 'ball stud' and you will find a lot of information on this. |
All times are GMT -4. The time now is 08:06 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website