![]() |
Idle ghost
Hello everyone. This is my first post on this site. My question is this....
I own a 1986 300 E with 180,000 km on it.When i start the car it fires up ok then soon as it warms up it fluctuates fron 500-2000 rpm. Soon as it does this if I remove the OVP when its running the rpm go to 500 and the ghost goes away.But when the car cools down I have to replace the OVP in order to start it. With this way I still have all the power but It was becoming a hasle to get in and out of the car to do this so for now I ran two wires with a switch inside the car with an inline fuse conected where the fuse for the OVP is and drive it like that. I know this is a temporary fix and i searched the threads but I cannot figure out how to solve this issue. Thanks in advance for all the help. Harry |
If you search the threads, you'll find the most likely causes of this symptom are a bad OVP or airflow meter pot, with likely complications from air leaks from old rubber in the idle air circuit.
Steve |
All times are GMT -4. The time now is 09:00 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website