Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 09-24-2003, 11:37 AM
Registered User
Join Date: Sep 2003
Location: Massachusetts
Posts: 10
w124 seat rail ball bearings

The power drivers seat on my 1992 300D has been spitting ball bearings out of the right side seat rail. I put the seat all the way forward and looked at the left side. I see what appears to be a bearing in the rear end of the track. I can't see any bearings in the end of the right track. How did the bearings come out of the right track? I want to put them back in. I saw a post from a guy about this a few years ago but, nobody responded. Has anyone had experience with this? I would really appreciate some advise. Thanks.

Reply With Quote
Old 09-24-2003, 06:48 PM
Registered User
Join Date: Feb 2002
Location: Seattle
Posts: 596
I have checked with techs and they go back in but never stay in. You can get the part. I have replaced one, not too bad. Interestingly, my '86 300E with 168k miles is fine. My '92 300TE with 118k has lost both outboard ones, first the passenger, now the driver.

1986 300E Anthracite + ECodes + MB Mileage Award

Last edited by d2bernhard; 10-07-2003 at 07:29 PM.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 06:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page