|
|
|
#1
|
|||
|
|||
switching trannys 1970 250C to 1967 250S ?
Howdy
Ok I have a 1970 250C and it needs a tranny. I came across a 1967 250S tranny that is stick. My car was automatic. Will this tranny fit? How do I convert mine to a stick. THanks Just got the 1967 250S home. If anyoone needs any parts off it let me know. Engine and tranny are gone. Thanks |
#2
|
|||
|
|||
You will need a different driveshaft, the correct speedo gear, the clutch pedal and master cylinder, a manual tranny flywheel balance matched the the auto flywheel (see other posts on balancing, it's complicated), and a gearshift cover. Hole for the shifter (floor shift) is already there.
You could also fix up the column shift if you wanted, but I don't know why. I could use the wood trim at the top of the front passenger door, I'm missing that bit. Peter
__________________
1972 220D ?? miles 1988 300E 200,012 1987 300D Turbo killed 9/25/07, 275,000 miles 1985 Volvo 740 GLE Turobodiesel 218,000 1972 280 SE 4.5 165, 000 - It runs! |
#3
|
|||
|
|||
Hi what wood part did you need for your benz?? I think I have pretty much all the wood trim. I'll take a pic and post later.
|
#4
|
|||
|
|||
Jennifer:
The top piece on the front passenger door, with screws. There are three parts, I only need the top one. Thanks! Peter
__________________
1972 220D ?? miles 1988 300E 200,012 1987 300D Turbo killed 9/25/07, 275,000 miles 1985 Volvo 740 GLE Turobodiesel 218,000 1972 280 SE 4.5 165, 000 - It runs! |
#5
|
|||
|
|||
I don't think the 250S trans will fit in the 250C - the 114 body needs the type with the shift levers on the side. The 250S' shift mechanism is on the top TTBOMK.
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe |
Bookmarks |
|
|