|
|
|
#1
|
|||
|
|||
sun visor
Is there any way to tighten a loose sun visor on a 1974 450SL? Mine is loose like the little ball needs to be tightened. Thanks.
|
#2
|
|||
|
|||
It's a common problem on 107's; search the forum on floppy and visor, and you should find a thread or two with a good description of the procedure.
__________________
Craig Bethune '97 SL500, 40th anniversary edition '04 Olds Bravada (SWMBO's) '06 Lexus ES330 '89 560SL (sold) SL--Anything else is just a Mercedes. (Kudos to whoever said it first) |
#3
|
|||
|
|||
first remove the rearview mirror with a sharp jerk to either side.
then remove the upper trim panel for the perspective side in need of repair. you will then uncover an additional screw to adjust the tension of the visor. when installing the mirror again,coat the both sides of the spring tabs with a light coat of grease. install 1 end in and with the mirror now at an angle,place the end of a plastic handled hammer at the other side. and with 1 good rap from your hand in the upward motion, the other side will snap in ..... good luck, pmjs |
#4
|
|||
|
|||
Thank you very much for your replies. A great help!
|
Bookmarks |
|
|