1st gear start question
Hi guys,
When i engage first gear at a stop by switching to 2 then back to D. And then I press the pedal, it only stays in 1st for about 1 second. Is this normal, or would this be a symptom of a failure starting to occur somewhere? Maybe the kickdown switch, though i dont know if this switch is related to the first gear function. Thanks, Josh |
How hard are you pressing the pedal?
If you're flooring the car - it should run to redline. Anything less than flooring and the tranny may try to upshift quickly for fuel efficiency.
|
Another question
What model are you driving?
|
thought i already replied but
I thought I already replied to this, maybe i accidentally did to a different post:eek:
I push the pedal down about 3/4 of the way, and it only stays engaged for about 1 second. I am not flooring it. But i would think it should stay in first longer without flooring it since i am engaging 1st gear through the shifter method instead of the kickdown switch method? I dont know. The car is an 88 190e 2.3 8v with a 91 engine. |
All times are GMT -4. The time now is 08:55 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website