|
|
|
|
|
#1
10-10-2003, 06:58 PM
|
||||
|
||||
|
What parts do I need ??
Hi, Im gonna try to change my fuel injectors this weekend. What parts do I need orther than the injectors and the seals?? And is there any particular method to doing this repair or any quick tips/ Thanks for your help.
__________________
Brandon 2008 S550 1957 Dodge D100 1967 VW Microbus 21 Window 2001 Suburban 2004 Beach cruiser bicycle -----------------GO DUKE!----------------- "It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776 
|
|
#2
10-10-2003, 10:13 PM
|
||||
|
||||
|
The fuel injector holders and injector o-rings might need attention. The o-rings are a PITA to install. About the only tools you need are an allen key/socket to release the injectors and a 12mm(?) flare wrench to remove the fuel lines. You might need new fuel line clips but you can order replacements later for the ones that break.
Sixto 95 S420 91 300SE 87 300SDL 83 300SD
|
|
#3
10-11-2003, 02:12 PM
|
||||
|
||||
|
Sixto,
Thanks, ...Is there a method I should follow I know the fuel is under high pressure there?
__________________
Brandon 2008 S550 1957 Dodge D100 1967 VW Microbus 21 Window 2001 Suburban 2004 Beach cruiser bicycle -----------------GO DUKE!----------------- "It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776
|
|
#4
10-11-2003, 03:01 PM
|
||||
|
||||
|
Be cautious, but I've never been squirted in the eye. Put it this way - at idle, you can pull off an injector line and count the drops. How much pressure can there be in the individual injector lines? Upstream might be a different story.
Set your wrench on a fitting, drape a rag over the fitting, then loosen the fitting. After the pressure is gone from one fitting, there won't be pressure in the others. Sixto 95 S420 91 300SE 87 300SDL 83 300SD Last edited by sixto; 10-11-2003 at 09:57 PM.
|
|
#5
10-11-2003, 08:51 PM
|
||||
|
||||
|
your the man
__________________
Brandon 2008 S550 1957 Dodge D100 1967 VW Microbus 21 Window 2001 Suburban 2004 Beach cruiser bicycle -----------------GO DUKE!----------------- "It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776
|
 |
| Bookmarks |
|
|
Linear Mode
