PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   What else, while replacing springs? (http://www.peachparts.com/shopforum/tech-help/7713-what-else-while-replacing-springs.html)

atkinsonrr 05-28-2000 08:02 PM

I have decided to replace all 4 coil springs on my 1984 300sd and was wondering, should I replace the spring pads at the same time, or should I expect the old ones will most likely be OK? Also, while I have the springs out, are there bushings, etc. that it would make sense to replace?

------------------
ROBERT IN ALASKA
1984 300SD in Astral Silver
96k miles

LarryBible 05-28-2000 10:47 PM

atkinsonrr,

I doubt that you need to worry about the pads, but this will be an ideal time to check the ball joints, control arm bushings and track rod links for tightness.

Good luck,

------------------
Larry Bible
'84 Euro 240D, 516K miles
'88 300E 5 Speed
'81 300D Daughter's Car
Over 800,000 miles in
Mercedes automobiles

atkinsonrr 05-30-2000 11:13 AM

Thanks Larry, will do!

jeffsr 05-31-2000 08:36 PM

Be sure to remove the pads and check the seats for rusting and general road garbage. If rusty, clean, repaint and reinstall pads.

------------------
Jeff L
1987 300e
1989 300e
1987 BMW 325


All times are GMT -4. The time now is 09:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website