|
|
|
#1
|
|||
|
|||
I own a 1985 euro 190e 16v with 35k miles.
To bring down co at idle and high rpm can it be done with air temp sensor and/or coolant temp sensor? if so how? Also to set base idle is there a stout connector or similar device that must be unplugged first to set idle? thank you for your advice |
#2
|
|||
|
|||
If you have these problems, you have a problem in the idle circuit.
You are in FOM (fixed operational mode).. Most of the time it is the air plate sensor or one of the other inputs. ------------------ Benzmac: Donnie Drummonds 1992 500E (very soon I hope 1981 280GE SWB ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
S203 C320 - adjusting door locks/ clatter from passenger side | eerola | Tech Help | 4 | 05-04-2005 07:51 PM |
Real quick, on adjusting steering box | The Warden | Diesel Discussion | 4 | 03-18-2003 11:31 AM |
Valve adjusting wrenchs & temper | Stevo | Diesel Discussion | 5 | 03-07-2003 11:06 AM |
adjusting steering freeplay | Fisherman | Diesel Discussion | 10 | 01-18-2003 11:17 AM |
Adjusting steering gear box | tablepad | Tech Help | 1 | 06-14-1999 09:31 PM |