Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 10-21-2003, 08:18 PM
Registered User
Join Date: Feb 2002
Location: michigan
Posts: 34
300td transmission

I need some help I just finished an engine swap and drove the car ( lessthan quarter mile). The car shifted sluggishly but smooth I parked the car to check for vaccum leak and poor idle . Found a fuel leak at 2 injectors and one balance line repaired ,idled smoothed out. Tranny fluid a pint low added fluid and connected a detacted vaccum line(green) Went to take for another drive, car would not go into gear. I can move selector and see it move the rod on the transmission. Is tranny bad? or have I connected something wrong .

Thankyou pat
Reply With Quote
Old 10-21-2003, 11:52 PM
Registered User
Join Date: Oct 2003
Location: New Hampshire
Posts: 9
300td transmission

I had a similar problem when I did a swap in a 560 SEL I had connected the gear shift wrong with the gears in the tranny. I had the tranny in neutral and attached it while the shifter was in park. The car ran but not like it should of it was an easy fix pu the tranny in reverse --look for back up lights then put shifter in reverse and attach. hope that helps
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 02:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page