|
|
|
#1
|
||||
|
||||
need some dimensions
hello folks
i need some help on a dimension. i am trying to find a mb rear door with a comparable dimension as my '88 420. i would like to install front and rear vent shades that fit up into the window channel. i don't want those stick on things. unfortunately i can only find a set that covers the front and no rears. BUT...they make a bunch of rear vents for other mbz. so i am looking for dimensions that i could use from other models. so if anybody can help me i am looking for the rear moving window dimension only. thanks for any help. craig
__________________
Thanks Much! Craig 1972 350sl Red/Blk 117k 1988 420sel charcoal/Blk 140k 1987 420sel gold/tan 128k See My Cars at:http://mysite.verizon.net/res0aytj/index.html Pound it to fit then Paint it to match! There is only First Place and Varying degrees of last! Old age and deceit will overcome Youth and Enthusiasm every time! Putting the square peg in the round hole is not hard... IF you do it fast enough! Old enough to know better but stupid enough to do it anyway! |
#2
|
||||
|
||||
thought i'd throw this question out again to see if any one can help me.
tks craig
__________________
Thanks Much! Craig 1972 350sl Red/Blk 117k 1988 420sel charcoal/Blk 140k 1987 420sel gold/tan 128k See My Cars at:http://mysite.verizon.net/res0aytj/index.html Pound it to fit then Paint it to match! There is only First Place and Varying degrees of last! Old age and deceit will overcome Youth and Enthusiasm every time! Putting the square peg in the round hole is not hard... IF you do it fast enough! Old enough to know better but stupid enough to do it anyway! |
Bookmarks |
|
|