Differential Gear swap 560 SEC
Gentlemen,
I sure spent alot of time looking around the site with little luck finding anything for A 560 SEC. This is what I know to go from the stock gearing 2.47:1 on any 1986 through 1991 560 SEC. I was told I could use the stock 560 Case and the Gears from the 107 SL's 450SL's 1972 through 1980 the 3.06:1 3.07:1 seems to be the best way to go. I was told that the SL's offers no Limited slip 1972-1980. It would be nice to have a Limited slip is that possible? Finding the right guy to do the job without spending a ton of money is a problem. I was told a good BMW or VW shop may have the knowlege and tools to do the job. There is also the problem of a ABS hookup that needs to be machined. I have a guy that works on VW rear ends with a great reputation and says he has the tools to do the job. If the pionion needs to machined where can it be sent to make the ABS work. I just found this site, this is my first post. Any help would be appreciated. Thanks, Gary |
All times are GMT -4. The time now is 05:41 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website