Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-14-2000, 02:38 PM
gam0524
Guest
 
Posts: n/a
Benzmac,
Just acquired a 1973 280 SEL with a 4.5 liter engine and great interior. When first started in the morning, the car has a high idle setting. Is this normal? It last until the engine comes to a normal operating temperature which is approximately 15 minutes. This is too long to wait. The next time, I tried to drive the car five minutes after starting the engine and noticed a lot of hesitation (looks like it was misfiring too)when you step on the gas pedal to accelerate. Is this normal for this model? Is there any adjustment that I could do? The car has 61kmi on the clock. The engine operates fine under other circumstances.
Thanks for your help.
Gilbert

Reply With Quote
  #2  
Old 06-14-2000, 07:59 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
High idle is normal for about 3-5 min durning warm-up. Miss-fire & running problems aren't normal. These cars require a lot more maint than newer cars. Points, valve adjustment & plugs are normal 6-10k mi service work. This isn't a DIYer car unless you have a lot of time & $$$.

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cold start easy, Warm start hard on my E320 300EVIL Tech Help 11 12-16-2008 10:15 PM
Inconsistent cold start behavior, 300E DavidB29 Tech Help 23 03-06-2007 08:44 PM
Problems to start engine when hot. No problem when cold (below 80 degrees C) pfgjerpe Tech Help 7 09-16-2002 11:02 AM
72 300 sel 4.5 cold start relay and valve SYDDONNA Tech Help 0 07-02-1999 10:09 AM



All times are GMT -4. The time now is 02:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page