99 SLK230 front brakes TQ specs.
 

Need the TQ specs for the Caliper to mounting bracket bolts and mounting bracket to front hub bolts.

NP

PS. I'm planning to replace the pads and rotor.

NP

Should be 115nm.

BTW, you don't need to remove the calipers to replace the pads. Take a look at the DIY or the Featured Cars tabs at the top of the page, there is a pretty good how-to for pad replacement. You should only have to pull the calipers if you are also replacing the rotors.

Thanks, but the SLK has floating calipers, and the 1995 E shown in the DYI section has fixed.

NP

Floating, hmmm...then change that torque spec to 90nm, IIRC.

Thanks Mike.

NP