Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-15-2003, 02:09 AM
Registered User
 
Join Date: Nov 2003
Posts: 2
wiper moter

Im trying to find out the method of replacing the windshield wiper moter 1991 190 e 2.6
Reply With Quote
  #2  
Old 11-15-2003, 10:44 AM
Registered User
 
Join Date: Feb 2002
Location: Belgium,Europ
Posts: 196
Hello Terry,

I am not very familiar with the 1991 - 190 but if it's a W 201 than I can be of some help to you because I have a manual in German. If you excuse me for my poor English than I'll translate the R/R procedure for you.
- Put the wiperarm in his most extended position ( pointing to an upper corner of the winscreen ) using the key contact switch ( wiper switch on and than contact on and off : you'll have to be quick for that !). Pull out the key : there is a warning here : leaving the key in and moving the wiperarm by hand could harm the Parctronic - assistent if you have that option. Don't ask me how are why!
- Look at the wiperarm : there is a little plate on the base that you can "flip up" with a smal screwdriver;
- Under that cover a smal bolt with a 4 mm Allen-head. Unscrew that bolt and slide the arm off;
- Left and right of the middle of the big oval cover at the base of the arm are two smal bolts and at extreme left of the wiper mechanism two other smal bolts : take them out;
- Right beneath the wiper shaft is the mechanism hooked to the firewall. Unhook with a screwdriver;
- Take the plug elec. connector from the wiper motor and take the assembly out
If you want or need to, you can further dissassemble by unscrewing the nut on the motor shaft and take the arm of but mark the exact position before!
Torque-loads :
- arm on elec. motor 5 Nm ( Newtonmeter );
- short lever on motor shaft : 19 Nm (verify the forementioned position !!);
Well : that's it ! I hope it will be of some help to you.

Good luck !

Danny
Reply With Quote
  #3  
Old 11-15-2003, 03:46 PM
Registered User
 
Join Date: Nov 2003
Posts: 2
wipers

Thanks Danny I appericate it. Have a good day.
Terry
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page