Got some minor surface rust under front door seals..('92 400e)..Along the top of the doors. What's the trick to removing the old rubber and installing new seals? The current seals seem to very in-place with adhesive....Planning on removing seals so I can put a halt the rust .Your help is appreciated
|
I don't remeber for certain, but I think that they are pushed into a groove. I think that you lube them up and then slide into place. If glue is needed, you can use the 3M super weatherstrip adhesive. It will hold.
------------------ Benzmac: Donnie Drummonds 1992 500E (very soon I hope :) 1981 280GE SWB ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
All times are GMT -4. The time now is 01:09 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website