Anyone know of what the ride height is supposed to be on a 84 300sd (and how to measure it)? I have replaced springs and am trying to get the height back to normal but dont know what normal is!
------------------ ROBERT IN ALASKA 1984 300SD in Astral Silver 96k miles |
Does it look too high? There isn't much you can do to change height using stock replacement springs and pads. Ground clearance is measured usually at some point near the center of the body and at both ends from a specific point, such as the lower edge of a fender, the bumper or whatever. Depends on the car
------------------ Jeff Lawrence 1987 300e 1989 300e 1987 BMW 325 [This message has been edited by jeffsr (edited 06-17-2000).] [This message has been edited by jeffsr (edited 06-17-2000).] |
Yes, it is definitely high in front, and probably low in back.
|
All times are GMT -4. The time now is 07:35 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website