|
|
|
#1
|
|||
|
|||
instal modulator 190 E
Are there any hints or tricks to removing and instaling a modulator on an 85 190E 2.3 ,theres not much room to work.thanks.......
William Rogers........ |
#2
|
||||
|
||||
Are you talking about the vacuum modulator on the transmission?
|
#3
|
|||
|
|||
Yes it on a friends car there is plenty of room on
my 126's to get at it but durn little on the 190 reminds me of on of them Toyotaaaaaaa's.......... William Rogers......... |
#4
|
||||
|
||||
Theres not really any tricks to removing and installing it. Its so hard to get to it cuz theres not enough room. If you disconnect the driveshaft by removing the bolts from the flex dics....it will allow the transmission to drop down a little. That should give you enough room to work with. To remove the modulator.....you twist it.
On a side note.....I just recently swapped out my 85 transmission and I put in a 86 auto. I fried my 85. |
#5
|
|||
|
|||
Be sure to CLEAN aroun the old one so no dirt and rocks can enter. Have it professionally adjusted when done.
|
Bookmarks |
|
|