Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 11-19-2003, 08:15 PM
txstinger's Avatar
Registered User
Join Date: Nov 2003
Location: Dallas
Posts: 79
ohm read on idle speed adjuster

I blew a chip in my Idle Speed Controller (2nd time in 3 weeks) and would like one of you pros to tell me what value the Idle Speed Adjuster should Ohm out at.

Any sl enthusiast can take this measurement with a volt/ohm meter. Unplug the connector to the adjuster. Set your meter to read ohms (low scale), place the red lead on the top post & black lead on the bottom post and see what you get.

I thank you for this needed info. Tomorrow I plan to change out the bad chip on the controller board and try it one last time. I fear that my adjuster is on its way out.

My info: 83' 500SL (117.962 engine) 8zl coded controller, my cd manual does not reflect the correct wiring colors - black/green wire on bottom post & black wire on top post. These go to pins 5 & 1 on the controller. My measurement = 4.2 ohms.

Thanks for your help.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 11:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page