"W124 wiper doesn't park properly"
 

My windshield wiper is not working correctly on my E280 1993 W124. The problem is that stops too early when I turn it off. That is, it will not "park" properly (parks a coupe of inches too high). Otherwise the wiper work fine.

Any suggestions or remedy?

Thanks in advance
Dimmi

Wiper park
 

Hello Dimmi,
If your park facility works consistantly ( ie parks in the same place every time) simply remove the wiper arm from the drive shaft ( where it comes through the bodywork) place the wiper where you want them to park and re-secure .

Best of luck David