'86 W124 blower motor fuse fix
 

I understand that the blower motor (heater/ac) on the 124 develops an increasing current draw as it ages, blowing the fuse and actually causing a sort of melt-down in the fuse box. Mine has gotten really bad. I have heard that there is a fix for this thru MB, but I think it is simply a bypass of the fusebox and going to an inline fuse with a higher amperage. If I am correct, does anyone know the parts needed to do it, and the procedure? Is this a DIY job?

Plink49,

The kit number is 924 540 00 99 1086 and contains the
following parts:[list=1][/list=1]

• 1)Terminal Block, Single Pole 000 540 08069
• 1) Auxilary Fuse Box 126 540 30 13
• 1) Bracket 124 545 53 40
• 1) Cable Strap 000 540 08 69
• 2) Screw 007985 004123
• 2) Screw 007981 0042440
• 2) Washer 912004 004102
• 1) Fuse Designation Card 124 545 09 00

Back in May I got this reply from Phil at FastLane when I enquired about price and availability:

"Hello Gary,
The kit is special order. $57.50 delivered"

Whether it's a DIY job depends on your level of skill and sense of adventure. :D

Hope this helps

Gary