Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-29-2003, 09:59 PM
shoerjim's Avatar
Registered User
 
Join Date: Nov 2003
Location: Petaluma California
Posts: 7
Question groans from w123 Bearing?

When I turn the car left it groans. Its Like a warble growling noise. Doesn't happen at all turning right or driving straight. It has to be going at least 25 mph for it to happen. It has newer Michelins and front end work. Tires pressure is about 30-35Lbs. The steering is responsive and not loose at all.

Reply With Quote
  #2  
Old 11-29-2003, 10:54 PM
I told you so!
 
Join Date: Jun 2002
Location: Motor City, MI
Posts: 2,853
Yup, it sounds like a bad bearing. Can you tell if it's coming from the right-hand side?
__________________
95 E320 Cabriolet, 159K
Reply With Quote
  #3  
Old 11-29-2003, 11:19 PM
shoerjim's Avatar
Registered User
 
Join Date: Nov 2003
Location: Petaluma California
Posts: 7
Sounds like it comes from the left, but hard to say. I just pulled the bearings out and they look good, but they seem awfully loose as a set. Know what I mean? Without a new set to compare them to its hard to tell. The middle ring seems to want to pop out of there. The whole set seems sloppy.
Reply With Quote
  #4  
Old 11-30-2003, 08:56 AM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 13,666
I would try to find a like brg and compare the two. Excessive clearance indicates a worn bearing but you have to quantify "excessive". They are pretty cheap so I would just go ahead and replace if I had any doubt about them.
__________________
Jim
Reply With Quote
  #5  
Old 12-01-2003, 12:21 AM
shoerjim's Avatar
Registered User
 
Join Date: Nov 2003
Location: Petaluma California
Posts: 7
Thumbs up

Done....Both replaced. Cheap, not too much effort...noise gone.....

Tomorrow 3.2mm diesel lines...Thanks for the imput...Cool forum

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page