Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 12-06-2003, 10:23 PM
Registered User
Join Date: Sep 2003
Location: Dallas, Tx
Posts: 701
96 sl320 Front main seal

hey Folks,
Has anyone changed the front main seal on a 320 engine? I had an oil leak so I replaced the upper timing chain cover seals and valve cover gasket, I still have a leak, not as bad but still there. I can see that it is coming from the main crank seal on the front of the engine.
I can not get the fan clutch off, I need some help on that, and will I have to replace the entire pan gasket? since the pan gasket is also sealed to the front lower timing cover. I have had this little car for 3 months and I keep finding oil leaks. When I took the upper timing cover off, I could tell someone else had been in there, there was sealer gooped all over, just a mess. Hopefully someday I will have no oil leaks.
Any help on the fan clutch and pan gasket would be helpful. Thanks a million!
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 11:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page