104.991 Help! Please
 

Three Questions:

1: how do I remove the fan clutch from the pulley on a 104.991?

2: If oil is coming into the intake through vacuum out of the crankcase, what is the cause of this?

3: Do I have to replace the oil pan gasket after removing and installing lower timing cover to replace front main seal? (it is leaking and throwing oil all over the place)

I put these questions in summary form in hopes for some help. These oil leaks are driving me nuts! Any help would be appreciated!
Regards,
Brian

Thanks PSFred for your help on the fan clutch!
Brian

Ok,
I got a puller 3- prong from the part store to pull the balancer. When I have the engine apart I am going to remove the intake manifold and try to figure out why all this oil is flowing through the crankcase breather vacuum line. I can also check the accessory mount that the oil is passing through as well. This is all making my engine compartment a mess. Has anyone ever thought of putting a manual together on how to fix these oil leaks on the 104? They are quite irritating. I might just do that! I have a digital camera and a computer!
Brian