Flex Plate Bolts
On my 1984 300D turbo I have to replace the flex plate and would like to know the torque and number of degrees for the 12 stretch-neck bolts that hold the flex late to the crank shaft.
Thanks |
30-40Nm then 90-100-degrees. Don't forget Lok-tite. I use the blue kind.
A tightening sequence similar to what's recommended for a 6-lug road wheel is probably a good idea. Sixto 95 S420 87 300SDL 83 300SD ... $950, see cars forum |
neck bolts
Thanks for your help and great info. I trust the info I get from this board. Thanks again
John. |
All times are GMT -4. The time now is 10:52 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website