PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   97 C280 - Possesed locks / interior lights? (http://www.peachparts.com/shopforum/tech-help/81897-97-c280-possesed-locks-interior-lights.html)

waybomb 12-13-2003 09:59 PM

97 C280 - Possesed locks / interior lights?
 
Have a 97 C280. A couple of weeks ago, we noticed that the door locks could not be locked with the switch on the dash. The doors can be locked with the remote key. Also, the dome light stays on all the time unless put into the off position (position 3).

The other day, the trunk opened all by itself when parked and sitting. So we closed the trunk, but we could not reopen it; not with the remote double-click, the key, or the interior trunk switch.

With the car off, sitting in the car with the doors closed, I press the door lock interior switch and I hear something run, but the locks don't lock. Still sitting in the car, I press the remote key and the same thing runs, and the doors lock or unlock as I need.

So then I figure something must be out of kilter with the computer, and after trying a few things, like locking the doors and unlocking the doors with the remote, and pressing the interior switch corresponding to the remote action, I now have the trunk unloking and locking as it should, but the door locks still only work with the remote and the interior light stays on unless turned off manually.

So, what do you think could be causing this?

Thanks
Fred

Gilly 12-13-2003 10:15 PM

Check the door jamb switches, they sometimes break, that could cause the dome light staying on problem, and may affect the locking system, but no idea why the locks would work one way and not the other. Worth a look anyways.

Gilly

waybomb 12-13-2003 10:23 PM

Hey Thanks!
That was it - the driver's door jamb switch is broken.
Fred

Gilly 12-13-2003 10:42 PM

OK Fred, for now I recommend just getting in there and disconnecting the switch for now, until you get a new one. Usually you can pull out the weatherstrip in that area and get in there enough to pull the connector out of the switch.

Gilly


All times are GMT -4. The time now is 12:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website