Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-14-2003, 08:49 PM
Registered User
 
Join Date: Jul 2002
Posts: 1,141
climate control soldering

before I attempt this...

Does someone have a good writeup. I am sure there was one floating on the web-but I cannot find it today.

I had just removed the bottom plate and was going to do the clean, flux, and remelt the solder. Then post clean with alcohol again.
One of the pins looks a little melted- pin 12 on the tempture dial side. It's got loose solder above the board somewhere.. I'd like to take it apart further and remove FOD.



Michael
__________________
Michael McGuire
83 300d
01 vw A4 TDI
66 Chevy Corsa
68 GMC V6 w/oD
86 300E
Reply With Quote
  #2  
Old 12-14-2003, 11:24 PM
Registered User
 
Join Date: Jul 2002
Posts: 1,141
Thanks for the suggestions...

I build my DAC for my stereo.. not perfect with etching boards, but I've got a nice temp controled soldering iron.

I use alcohol to clean-which will disolve resin(rosin?) too. For flux, from my military and NASA friends, I was always under the impression that they didn't allow stronger flux than RMA- and that's what I use.
Ussually get the temp on the iron right and 3-5 seconds is all it takes.

Still looking

Michael
__________________
Michael McGuire
83 300d
01 vw A4 TDI
66 Chevy Corsa
68 GMC V6 w/oD
86 300E
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page