|
|
|
#1
|
|||
|
|||
When lean starts easier, why?
I checked my plugs and they were a bit white in color. Then I checked my duty cycle and found it to be hovering around 80%. so I adjusted to about 50% and now the car doesnt start on the first few clicks anymore. It takes like 5 seconds of cranking, or sometimes crank and then turn off key and crank again.
I was wondering why this is the case? I thought it would have started quicker when it was richer, since there is a coldstart valve to provide a richer solution on startup. Thanks, Josh
__________________
1988 190e 2.3 with 91 engine |
Bookmarks |
|
|