PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Re-Sealing A/C compressor (http://www.peachparts.com/shopforum/tech-help/82431-re-sealing-c-compressor.html)

ALBERTO 12-20-2003 09:55 AM

Re-Sealing A/C compressor
 
Hi everybody,
I need some information about an A/C compressor because even if is still working fine I notice a small trace of oil near the clutch and I suspect that I have a gas leak from the shaft gasket. My car is a CLK 430 1998 and compressor is NIPPODENSO do you know where I can find a gasket-kit in Europe or some place in the USA able to send it to me? Many thanks to all because if not I have to go to MB dealer and I loose (an) arm and (a) leg for a rebuilt compressor......
Alberto

stevebfl 12-20-2003 10:58 AM

Very few places reseal nippondenso compressors successfully. I doubt you will be any different.

Some oil residue is normal at the front shaft. Are you low on refrigerant? Leave it alone untill you are sure you have a leak.

ALBERTO 12-20-2003 11:13 AM

Thaks Steve,
I would like...............but i think that i am low of refrigerant because during the end of summer the air was not very cold, and i would like to fix it befor the new summer due to hot temperature in Gneva city ( around 35- 38 Degree in some days...)
Many thanks
Alberto

jbaj007 12-20-2003 12:06 PM

Here's an article on one of the Porche boy's Nippondenso rehab. FWIW. http://www.pelicanparts.com/techarticles/911_Nippondenso_rebuild/911_Nippondenso_rebuild.htm


All times are GMT -4. The time now is 03:44 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website