Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-26-2003, 08:43 PM
lowrider67383
Guest
 
Posts: n/a
Please help 1984 se axle removal

hello to all how do i get the axle's out of the rear end on a 1984 380 se thanks to all that respond
i have it on stands right now in my garage please help

lowrider67383@yahoo.com

lpandcartman@aol.com
Reply With Quote
  #2  
Old 12-29-2003, 11:40 PM
Chemanic's Avatar
Registered User
 
Join Date: Apr 2003
Location: St Cloud, Fl
Posts: 48
the axle is held in place with a bolt you access in the center of the hub visible with wheel removed, and a c-clip found inside the differential housing after removing the cover.you will need to drop the exhaust,support the differential with a floor jack and unbolt the support(4 bolts/rubber donut) loosen sway bar bolts.a small locking plier helps you remove c-clips easily, rotate axel until tab on clip faces you.pray axel is not rusted tight in wheel housing and tolerences are very tight here so you will need to remove wheel side first and by twisting the axel at the joint to clear the housing then you will be able to remove it.difficulty factor-three beers&eleven muttered obsenities
Reply With Quote
  #3  
Old 12-30-2003, 12:45 AM
Senior Member
 
Join Date: Apr 2001
Location: Beech Island, S.C.
Posts: 468
Or after you remove the clip inside the differential you can just disconnect the shock behind the rear seat and it will give enough drop of the rear control arm to remove the axle.
Reply With Quote
  #4  
Old 12-30-2003, 01:11 PM
lowrider67383
Guest
 
Posts: n/a
thanks guys from the way it looks i cant get to the top upper bolts on the differ housing ----from what i see im going to have to drop the housing to access the upper bolts
Reply With Quote
  #5  
Old 12-31-2003, 12:25 AM
lowrider67383
Guest
 
Posts: n/a
done deal and thanks

done deal had to remove callipers 2 bolts so the lower control arm can come down everbody was right on the removel process

man talk about a tight fit





thank's to all who help me.
take care and god bless Andrew Reta in fresno calif
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page