Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-12-2000, 02:28 PM
Registered User
 
Join Date: Jan 2000
Location: Pittsburgh, PA, USA
Posts: 86
Back in January I replaced all of the cosmetic pieces under the front bumper on my wife's 83' 500sl. There is a plastic piece, I'll call it an air dam, that bolts to the valance and runs from one fender well to the other. When I purchased this piece from the local MB Dealer it came rolled up in a plastic bag. After I installed it on the car the areas in the front are all wavy from being rolled up. I tried to heat it a little with a hair dryer but this didn't help at all. I thought that maybe when the weather got warm it might straighten itself out but this hasn't happened either. There must be some proper way to install this piece. Any suggestions would be greatly appreciated.

TIA

Marc
Reply With Quote
  #2  
Old 07-12-2000, 09:11 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
When the 560 SL came out many people used the "chin spoiler" from that car to make the older SL's look better.
Reply With Quote
  #3  
Old 07-12-2000, 09:17 PM
Registered User
 
Join Date: Jan 2000
Location: Pittsburgh, PA, USA
Posts: 86
Am I to assume that this was a common problem with this part and not that I got a bad one?
Is the "chin spoiler" from the 560sl made of a more rigid material and is it a direct bolt on?
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Your tax dollars at work rickg Off-Topic Discussion 3 11-25-2005 11:24 AM
w126 Front Air Dam? moparmike Tech Help 3 10-31-2003 12:36 AM
Blowby and intake air rcmktg Tech Help 1 12-16-2002 05:11 PM
Will Alum 240D Air Cleaner Fit on 300D tcane Diesel Discussion 0 01-10-2002 08:33 PM
Air filter housing for 1991 420SEL BENZ-LGB Tech Help 1 05-11-2001 06:18 PM



All times are GMT -4. The time now is 12:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page