88 300e round dash plug in back of cluster
 

does someone have a picture of how to orient the round plug behind dash cluster. on the temp side. i pulled the harness plug off and when i put it back together the dash lights were not right. pulling it off again, noticed it can be plugged in any clocking direction. did some thing break off? there are numbers on the plug. does some one have a picture of which pin #1 lines up with. got lucky and only most of the warning lights do not work, the ones on the bottom left, some on the right.
what ever kind of key was there ain't no mo
thank you rich

There should be a key sticking out the middle of the plug.

You should be able to look at the orientation where the key broke off and the keyhole and figure out how it goes.

key,what key
 

the key is broken on the plug and the dash itself.
if the red fuse was blown would only the warning lights on the bottom of cluster be out. and all the gauges work ?
rich