|
380SL (1985) Stalling On Cold Start?
My 1985 380SL is hard to start and then stalls until it warms up some, after it runs for a few minutes it runs fine. What could be causing this?
Thank you. |
overvoltage relay, fuel pump relay, control pressure wrong, idle motor sticking, weak spark plugs. needs further checking. good luck, chuck.
|
porkface,
What is the "idle motor"? Thank you. |
on the front of the motor, silver, 2 hoses and 1 connector with 2 wires in it. if the label is on it, it says vdo. held down with a clamp and a 10mm nut. good luck, chuck.
|
To add to the list: warm-up compensator and cold start valve. Send me an email and I'll send you the section from the CD on what does what.
Good luck, The other Chuck |
| All times are GMT -4. The time now is 05:56 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website