I just purchased a 99 E300DT. It has the Bose sound system but no CD changer. I called MB and they said it would definitely be prewired. However, I have searched the left and ride sides of the truck and can't find any wiring for the changer. Is it possible it was not prewired or am I not looking at the right place.

Thanx.

Dave

Welcome to MB shop
It's there. On the left (drivers) side of the trunk. You need to remove the panel completely, it'll be wire-tied to the inner support (metal bracing). This is a fiber optic system, so the prewiring will consist of 2 rather thick looking "wires", which are actually fiber optic cables. They will lead to a black angled connector with a green protective cap covering the tips. Don't mess with the tips (no touchee!). There will also be a small 3-wire connector which will also plug into the changer.

Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

Thanx, Gilly.

I'll take your word for it, but I thought I looked pretty good. I guess I better have someone do it that knows more than I . . . but first . . .

I pulled the changer out of my S320 . . . will it work in this '99? It is a MB changer.

Thanx again.

Depends on the year. If the S320 was fiber-optic, then it should work. If it just has the big 10 pin or so electrical connector, then it won't.

Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

Oh, I think it was the 10 pin. I guess that's a bummer!

Thanx.

Dave

Yup
You can contact the moderator of the "Car Audio" forum here at MB Shop and possibly get a good deal on one that is appropriate for your car.

Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

Thanx, I'll do that this evening.

Dave