|
|
|
|
|
#1
07-26-2000, 12:55 PM
|
|||
|
|||
|
Are there any special precautions I should take when installing the accumulators on my 2.3-16's rear suspension. It seems like a straightforward "unscrew a couple bolts" job, but I don't want to ruin the whole system by unhooking the wrong thing without taking the proper precautions.
|
|
#2
07-26-2000, 03:22 PM
|
|||
|
|||
|
It looks like you and I have about the same problem, and I have been looking into this a little today, and it looks pretty straight-forward. Cleanliness around the fittings seems to be the one thing to be really careful about. Don't need dirt in the hydraulic oil
 Good luck. Barry
|
|
#3
07-26-2000, 03:26 PM
|
|||
|
|||
|
Remember to relieve the pressure with the bleed screw on top of the control valve first or you will have a really messy garage.
|
|
#4
07-26-2000, 09:19 PM
|
|||
|
|||
|
The key to this job is to leave every bolt loose 'till the end. The small line will be hard to line up and start if you don't...Been there and done that.
Thanks ------------------ Benzmac: Donnie Drummonds 1991 GMC Syclone ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hydraulic suspension 560sel changed "hand grenades" HELP!! | moedip | Tech Help | 3 | 08-04-2009 11:44 AM |
| Replaced my air cells / accumulators! (long) | shawnster | Tech Help | 15 | 05-29-2005 10:40 AM |
| Changed the accumulators but no difference in ride quality. | newr | Tech Help | 8 | 02-07-2005 01:50 AM |
| Hydraulic fluid o w140? | MPM77 | Tech Help | 3 | 10-24-2003 12:35 PM |
| Replaced my air cells / accumulators! (long) | shawnster | Diesel Discussion | 0 | 07-08-2003 12:18 PM |
Linear Mode
