Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-24-2004, 11:09 PM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
Chain or valves?

Hi, I have a 1991 500SL with about 116K km's on it. When the engine is warm i hear rattling, sounds like a marble rattling in a tin can. The engine is very quiet so this noise really stands out. Everybody points it out to me. The noise comes when the engine is warm and at every stop light or stop sign or idling in traffic it is constantly making this rattling sound. However the noise goes away once the rpms increase. if i put the car in neutral at a light and rev the engine a little there will be no sound. I usually do this to avoid the embarassing noise. I feel that this noise has come after switching to 15W50 oil from 5W40. Could this be the reason? with 116K i dont think it could be the chain? I know the previous owner once went 30K with no oil change and another 20K with no oil change before selling the car. So maybe it is sticking valves? but i thought valves would make more noise when cold, not warm?

Reply With Quote
  #2  
Old 02-25-2004, 12:43 AM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
I forgot to mention....., I switched to synthetic oil after buying the car, to hopefully clean out the sludge that must have built up in there. I have done 3 oil changes since I bought it 8K km's ago.
Reply With Quote
  #3  
Old 02-25-2004, 06:10 AM
Registered User
 
Join Date: Aug 2002
Location: Southeastern PA
Posts: 3,077
Sid, it sounds like the timing chain tensioner needs to be replaced.
__________________
Fred Hoelzle
Reply With Quote
  #4  
Old 02-25-2004, 03:49 PM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
I was thinking about that too. is that a hard job. if i don't do it are the risks high of the chain breaking, becuase I really dont want to open up the engine since it only has 116K on it and has never been opened before. The engine never seems to be the same once it is opened.
Reply With Quote
  #5  
Old 02-25-2004, 03:55 PM
it leaks, its german
 
Join Date: Mar 2002
Location: raleigh nc
Posts: 1,111
Maybe but the cam oiler tubes are a better shot, does it sound a bit like light lifter noise?


Joe
__________________
Project Smoker, '87 603 powered wagon
Hauler, 96 CTD can you say torque?
Toy 73 Cougar xr7 convertible
Acme Automotive Inc.
Raleigh NC
919-881-0364
Reply With Quote
  #6  
Old 02-25-2004, 06:18 PM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
it does sound like lifter noises. however only when warm? the oil pressure seems to be normal. this only started happening after i switched to 15W50. I am planning on switching back, what do you guys think?
Reply With Quote
  #7  
Old 02-25-2004, 06:35 PM
Registered User
 
Join Date: Aug 2001
Location: Evansville, Indiana
Posts: 8,150
30,000k without an oil change? Yikes!

Check the chain tensioner -- pull the right valve cover gasket and see if you can push the curved rail back towards the fender easily. If so, get a new tensioner pronto, as a slapping chain will break the upper (plastic) chain guide, and that usually causes the chain to break.

Chances are that the lifters are shot from crap in the oil. Hard sludge builds up terribly in the lifter gallery on this engine if dino oil isn't changed often enough.

Full synthetic oil will usually remove the sludge and clear the lifters after a while, but if you change, change the oil filter at 1000 miles and 2000 miles with a top-up for the oil (no need to change the oil) to get the slops out of the engine. The filter will plug very quickly.

If the noise is definitely associated with the valves AND you can see oil running out of the oil tube onto the cam through the oil filler, synthetic will probably fix you all up.

Otherwise, you need to check the oil pressure and oil delivery at the cam -- if you have poor oil delivery, it's probably cam time, low oil pressure means change the filter, and if that doesn't help, you need to investiage the cause.

Peter
__________________
1972 220D ?? miles
1988 300E 200,012
1987 300D Turbo killed 9/25/07, 275,000 miles
1985 Volvo 740 GLE Turobodiesel 218,000
1972 280 SE 4.5 165, 000 - It runs!

Last edited by psfred; 02-25-2004 at 06:41 PM.
Reply With Quote
  #8  
Old 02-25-2004, 07:46 PM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
Thanks for your help. i really really don't want to open up the engine but now im scared the chain might break
Reply With Quote
  #9  
Old 02-25-2004, 09:57 PM
Registered User
 
Join Date: Aug 2001
Location: Evansville, Indiana
Posts: 8,150
East to check -- the chain will rattle at the very front on the engine, and bad tappets will be further back.

Get it checked out soon, a busted chain is $$$.

The good thing to know is that broken chains in a 560 are very uncommon.

What is you oil pressure at idle?

Peter
__________________
1972 220D ?? miles
1988 300E 200,012
1987 300D Turbo killed 9/25/07, 275,000 miles
1985 Volvo 740 GLE Turobodiesel 218,000
1972 280 SE 4.5 165, 000 - It runs!
Reply With Quote
  #10  
Old 02-25-2004, 11:53 PM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
when the car is just started it idles just below 3, then once it is warmed up it idles between 1 and 2, closer to 2.
when the temperature is at hundered it idles at 1, when the temperature is at 90 it idles at 1.5 and when the temp is just above 80 it idles close to 2.
its a 1991 500SL.
it does sound like it is coming further back.....
why would valves be more noise when the engine is warm though? when the engine is cold and first started it is very quiet?/
Reply With Quote
  #11  
Old 02-25-2004, 11:54 PM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
what happens if you continue driving a car with bad tappets/valves?
Reply With Quote
  #12  
Old 02-26-2004, 08:24 AM
it leaks, its german
 
Join Date: Mar 2002
Location: raleigh nc
Posts: 1,111
Those things tend to pick up a bit of light tappet noise when ageing anyway. As a preventive I'd do a chain and upper rails with a new tensioner and replace the oiler tube plastic bits as well. These engines do tend to scuff cams and rockers when the tubes start to go south and leak.


Joe
__________________
Project Smoker, '87 603 powered wagon
Hauler, 96 CTD can you say torque?
Toy 73 Cougar xr7 convertible
Acme Automotive Inc.
Raleigh NC
919-881-0364
Reply With Quote
  #13  
Old 02-26-2004, 12:04 PM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
does my oil pressure seem good though?
everymorning i have started taking the car out at 4 a.m and do about 160Km/h for about 5 mins....would this clean the valves or am i wasting my time?
Reply With Quote
  #14  
Old 02-27-2004, 08:39 PM
Registered User
 
Join Date: Aug 2001
Location: Evansville, Indiana
Posts: 8,150
Sid:

The hydraulic tappets fill with oil when there is no pressure on them so that the cam follower actually rides on the cam at light pressure. When the cam lobe starts pushing down on the follower to open the valve, the small valve in the lifter closes off the oil vent hole, and the lifter becomes "solid" and the valve is pushed open.

When they get old, they no longer fit together as tightly as the concentric bits wear (notably the valve) and with hot oil, will squash down as the cam goes round. If the dont' pump back up by the time the cam comes round again, it will slap on the follower making the click you hear.

SEveral cures -- replace them (expensive), use synthetic oil in the hopes it will give you slightly higher oil pressure hot and dissolve some of the sludge preventing the lifters from filling, and (cheapest) check to see if there are some 0-rings on the center shaft of the oil filter cap (if you have one -- not familar with that engine). If there are two o-rings on there, no one ever replaces them, and when the get old and hard, the oi leaks out of the lifter gallery on some engines. New o-rings will go a long way towards fixing the problem.

Peter
__________________
1972 220D ?? miles
1988 300E 200,012
1987 300D Turbo killed 9/25/07, 275,000 miles
1985 Volvo 740 GLE Turobodiesel 218,000
1972 280 SE 4.5 165, 000 - It runs!
Reply With Quote
  #15  
Old 02-28-2004, 12:31 AM
Sid The Kid's Avatar
Registered User
 
Join Date: Dec 2003
Posts: 92
Thank you Peter.....now that I read your post it makes very good sense it is the valves and not the chain. Like you said when the oil gets hot it doesnt hold enough pressure and I get that sound. The sound comes when I get to about 100 degrees and the oil pressure is at about 0.5 I hear that slapping sound. If the temperature doesnt get to near 100 degrees everything sounds fine.
Everyone I talk to says its normal for the temperature to reach 100 at idle and up hills. On straight roads with no traffic the temperature will stay at around 82 degrees and the noise will not be there.
When the noise does come it is pretty loud, you can hear it from quite aways.
when my tempeartre reaches 100 it will go down again to 90 once i start driving and if i drive long enough it will drop to 82.
i am using mobil 1 15W50 right now and when i wa susing 5W40 it wasnt making that sound. do you think my old oil was holding better pressure at high temps that is why i wasnt getting the sound?
so if it only happen at 100 degrees do i still have to worry about it or can i live with it??
thanx

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page