|
|
|
#1
|
|||
|
|||
Belt tensioning damper
I need to replace the belt tension damper on my M103. The bottom bolt is visibly loose, so I at least need to tighten that. The top bushing is also shot (possibly the bottom too). I can't figure out how to get to the bottom bolt without taking apart a lot of things I don't want to touch.
|
#2
|
||||
|
||||
No too many ways around it...
as a matter of fact, I would check the belt tensioner while you are in the inmediate area.
__________________
J.H. '86 300E |
Bookmarks |
|
|