PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Help with linkage bushings and park pawl (http://www.peachparts.com/shopforum/tech-help/8862-help-linkage-bushings-park-pawl.html)

Phill 08-10-2000 08:12 PM

Hello MB guru's.

Well, a month or so back I told you all
my automatic 81 300D was not catching in park, and also it will not start in park. Have to put it in neutral. Also the shifter seems a little loose.

Some of you said I need to check and adjust
the parking pawl and also linkage bushinsgs.

I'm looking at my "fairly" trusty Haynes
manual. Shows the basic linkage, but that's
it. Are the bushing and pawl under the shift
consol, or are down shift lever at the
trans? I've not even looked at it yet, but assuming at the transmission. I have no
experience with transmissions.
Thanks.

Benzmac 08-10-2000 08:42 PM

Best thing here is to replace the shift rod bushings that are under the car. Do this first before any adjustment is made.

------------------
Benzmac:
Donnie Drummonds
1991 GMC Syclone
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

Phill 08-11-2000 08:05 AM

Thanks Benzmac, will do.

By the way, after I posted, I found an old
IMPCO catalogue which showed just what I needed. Forgot I had it. Phill


All times are GMT -4. The time now is 09:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website