PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   190E 2.3 (http://www.peachparts.com/shopforum/tech-help/8885-190e-2-3-a.html)

Beatle Juice 08-13-2000 10:09 AM
What is the procedure to put this auto into the diagnostic mode, so that I can read the duty cycle with a Fluke 88 DVM. Thanks in advance.

Beatle Juice

Benzmac 08-13-2000 12:21 PM
There is a button near the battery. You have to push it for four seconds to read the codes, if there are none (code 1), then you are in diagnostic mode.

------------------
Benzmac:
Donnie Drummonds
1991 GMC Syclone
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM


All times are GMT -4. The time now is 12:13 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website