I am thinking of removing the filler piece from my front bumper, so that I can get the longer narrower European license plate for the front of my W124. I currently have a partial filler that accommodates the shorter US license plates and I want to try to remove it. There are some screws visible and what looks like a spring mechanism of some kind. It might be very simple to remove, but I wanted to ask before I gave it a try and did some damage. Please advise me on how to remove my partial filler piece.

As a second question, I want to know where to get a European version of the Black powder coat license with a chrome star. I often see the US version of the star license plate, but I have not seen the longer narrower European version. There are lots of places to get a custom Euro plate with whatever letters you want, but I want the black license plate with the chrome Mercedes star. I will certainly ask the dealer, but I thought it was worth asking here on the forum.

Attached Thumbnails

 

__________________
I just couldn't give up on my 1995 E320.

I think it might be like always going back to that same bad relationship with an ex girlfriend.
You feel you love them too much, or you are just too stupid to know any better.



Flickr slideshow of my 1995 E320
http://www.flickr.com/photos/24145497@N06/sets/72157616572140057/

My ML has the black with the chrome star (US version) and the SL has the badge version in chrome (also US version).

I had the black euro version on my 300E, but found that it couldn't withstand road debris very well and pitted...so I opted for the chrome one...got it at:

www.************************



The plastic filler slot is easy to remove...just don't damage that metal rod near the bottom that seems to have a cable attached to it...that's your ambient temerature sensor...

__________________
2009 ML350 (44K) - Weekend college shuttle
2001 CLK430 Cabriolet (71K) - Wife's car
2001 BMW 325CI (140K) - My daily driver
1998 Mustang GT Convertible (146K) - Daughter's car