PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Glove box door alignment (190E) (http://www.peachparts.com/shopforum/tech-help/9185-glove-box-door-alignment-190e.html)

ScottyC190E 08-29-2000 08:31 PM

Hello everyone,
I have a 86 190E. This is irritating to me every time I look at my glove box: The glove box door is hanging down a little more than the rest of the dash lines when shut. I tightened all of the screws I could see but it didn't do me any good. Can anyone help me? Thanks!

------------------
Scott Chaffin
190E 2.3 8V
http://www.geocities.com/scotty-c_2000/
slchaffin@ou.edu

jeffsr 08-29-2000 08:59 PM

You need to align the door. Open the door, loosen the hinge retainer screws on the door so that the door is moveable but not loose. Close the door and use a 1 1/2 or 2 inch putty knife to move one edge or the other up or down. This will take a bit of fooling around to get right. When it looks good, gently open the door and retighten the screws..

------------------
Jeff Lawrence
1987 300e
1989 300e
2000 Dodge Grand Caravan SE


All times are GMT -4. The time now is 09:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website