Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-29-2000, 08:31 PM
Registered User
 
Join Date: Jul 2000
Posts: 177
Hello everyone,
I have a 86 190E. This is irritating to me every time I look at my glove box: The glove box door is hanging down a little more than the rest of the dash lines when shut. I tightened all of the screws I could see but it didn't do me any good. Can anyone help me? Thanks!

------------------
Scott Chaffin
190E 2.3 8V
http://www.geocities.com/scotty-c_2000/
slchaffin@ou.edu

Reply With Quote
  #2  
Old 08-29-2000, 08:59 PM
Registered User
 
Join Date: Jan 2000
Location: New Bedford, MA USA
Posts: 1,583
You need to align the door. Open the door, loosen the hinge retainer screws on the door so that the door is moveable but not loose. Close the door and use a 1 1/2 or 2 inch putty knife to move one edge or the other up or down. This will take a bit of fooling around to get right. When it looks good, gently open the door and retighten the screws..

------------------
Jeff Lawrence
1987 300e
1989 300e
2000 Dodge Grand Caravan SE

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Glove box size??? blankpro Tech Help 0 07-21-2004 01:42 PM
Where and How do I open my glove box? lucasdaye Mercedes-Benz SL Discussion Forum 5 03-23-2004 06:12 AM
1998 C230 Pre wired phone pinouts for db45 connector in glove box c230can Car Audio and Multimedia 2 06-25-2003 10:33 PM
glove box alignment JHZR2 Diesel Discussion 11 01-25-2003 10:36 AM
vacuum lines diagram behind the glove box wualdo Tech Help 0 11-11-2002 10:52 AM



All times are GMT -4. The time now is 06:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page