Is this right? (pic)
1 Attachment(s)
the nice weather has inspired me to go on a bit of a fixing binge.
This is a shot of the driver's door handle. When I open the door, the mechanism squeezes the white vacuum line and sticks in the 'pulled' position. Is it routed correctly? I know it is an oddball problem, but if someone knows, that would be swell. Mike |
A better pic would help as this one is too blurred.
|
That is the alarm signal wire & it should be away from the handle mechanism.
There is a plastic plug at the end of the door that the connector for that wire is supposed to live. TAKE a look at the other side & see how it is routed. |
Thanks for the repsonse. Other side looks the same.
Are you saying they clip to the interior door skin? If so I will pull the panel and set things right. Mike |
All times are GMT -4. The time now is 12:43 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website