|
|
|
|
|
#1
09-13-2000, 06:41 PM
|
|||
|
|||
|
In the morning when I first start the car and move the wheel It makes a strange squeeking sound.Could the steering box going bad?I had to replace one in my 87 300E.
|
|
#2
09-13-2000, 08:11 PM
|
||||
|
||||
|
Could it be the contact ring between the steering column and wheel? Mine made some noise so I had it changed out...noise all gone
------------------ Best regards, Michael '92 500E, Almandine Red, 17x8.5" AMG Sport rims '88 300TE, Arctic White, 16x7.5" Mille Miglia E420/430 replica rims
|
|
#3
09-13-2000, 08:23 PM
|
|||
|
|||
|
Is the noise coming from the inside of the car or the outside?? If the outside, most likely dry ball joint or tie rod end. If inside probably steering column bearing.
------------------ Jeff Lawrence 1989 300e 2000 Dodge Grand Caravan SE
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 126 frozen steering lock/tumbler removal (fairly easy, but long) | jbaj007 | Tech Help | 4 | 09-21-2019 03:19 PM |
| Help! Steering box input shaft clunking | JHZR2 | Diesel Discussion | 19 | 04-11-2017 11:14 AM |
| w115 Steering coupling Finished | NC240D76 | Vintage Mercedes Forum | 3 | 11-22-2004 08:31 AM |
| Can't cure your loose wandering steering problem, read this! | Channel1 | Vintage Mercedes Forum | 5 | 04-21-2001 09:41 AM |
| steering offset geometry | bobbyv | Mercedes-Benz Wheels & Tires | 0 | 08-19-1999 09:20 PM |
Linear Mode
