|
|
|
#1
|
|||
|
|||
Sears 82139 DMM SALE...
Hi All,
I just looked at the Sears website and it's $19.99... Time to buy one... Maybe be 2? thanks,
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen |
#2
|
||||
|
||||
Has anyone used a thermocouple probe on this DMM?
Does a Fluke type K probe work on this? or only the Craftsman one? The temp range for the Crafstman lists a lower limit of 40º, but I think it's a missprint of -40º. Any one familiar with it? Trying to do some superheat work with my TVX and this would be helpful. Thanks.
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) |
#3
|
||||
|
||||
could you post a link to that site. I would like to know what's different about this dmm compared to the ones that we can get at radio shack etc. any features that this would provide that the others don't have ?
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#4
|
||||
|
||||
ok, found the site.
http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=03482139000 now my question is, compared the above from sears to the one below from radio shack what features are usefule to the benz in particular that are helpful. please disregard the price. I'm only concerned about the features that are specific to our cars at the moment. http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F011%5F008%5F002%5F000&product%5Fid=22%2D812 the reason I ask is because I already have the one from radio shack listed above, but if it lacks any functions that the one from Sears offers then I'll get the one from sears as well.
__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford. |
#5
|
|||
|
|||
I doubt that Radio Shack has one with Duty Cycle range.
As far as the thermo couple goes, they are all the same. All a thermocouple consists of is two dissimilar metal wires, one iron and one constantine. When I worked in a burn in house we would simply tin the ends of thermocouple wire which was these two wires in the same sheath and twist them together. It was absolutely as accurate as the thermocouples that we could pay more money for. So, electrically they are all the same as long as they will plug into the meter. Good luck, |
#6
|
|||
|
|||
I just went out and found the book that came with mine. It gave -4 to 720 degrees C as temp measurement range.
It also indicated a type K thermocouple. Also there was a naysayer on another thread saying that cheap meters would have low input impedance. That is not the case. The spec's show 7.5 Meg Ohm input impedance. I've been around electronic test equipment since 1968 and I never thought you would be able to get such a great meter, much less for $20. I temporarily lost mine by loaning it and thought I was not getting it back. I bought another one and now have two after he finally returned it. I don't regret it. I threw it in a toolbox that I carry away from my shop. For this kind of money how can you go wrong? Have a great day, |
#7
|
|||
|
|||
Through May 23, you can get $2 off the $20 price if you are a Craftman Club member. I think you can apply as you buy but I am not sure. $18 was such a good price, I bought two but $20 is great as well.
|
#8
|
|||
|
|||
Decided to pick up an extra meter, and decided on this model. Everything looks great, but the volume for the continuity setting seems a little weak. Do other people with this meter get a good solid "beep", or something that sounds more like a geiger counter? My cheapy Radio Shack meter has a much better audible for continuity.
Thanks.
__________________
J.B. Hebert -------------------------- Current Vehicles: '76 Ford Bronco '78 Volvo 262C Bertone V8 '80 Alpina B7 Turbo Coupe (For Sale) '94 Ford Explorer '95 Mercedes E300D Sportline+ |
#9
|
|||
|
|||
The beeper volume on both of my meters is fine. I'm sure that if there was a lot of background noise I wouldn't be able to hear it, but that's pretty much a creature comfort anyway.
Have a great day, |
#10
|
|||
|
|||
Hmmm... that's what I figured. Looks like I'm going to have to contact Sears for a replacement. Mine cuts in and out and is weak at best.
Thanks!
__________________
J.B. Hebert -------------------------- Current Vehicles: '76 Ford Bronco '78 Volvo 262C Bertone V8 '80 Alpina B7 Turbo Coupe (For Sale) '94 Ford Explorer '95 Mercedes E300D Sportline+ |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|