|
|
|
#1
|
|||
|
|||
I got a 90' 300CE. It is a Californiya version. There is red light indicator in the computer outlet where techs stick their testers for diagnosticks. I have used this unit to reset the "Check engine" light several times, and I know that in the proces of reseting, this unit puts out a code by blinking with the red indicator. Is there any way i can get my hands on some sort of the table that will have this codes and their meaning. Going to the shop every time the light comes on is a pain in the ...
Its already been twice since the worning light came on and I reset it without knowing what it was about (it gave me codes 17 and 11). Thanks Dmitry [This message has been edited by DMITRY (edited 09-21-2000).] |
#2
|
||||
|
||||
D - this is the code for a '95 E320. Hope this helps.
1995 E320 3.2 L engine (flashes on LED) 1 No malfunction in system monitored 2 Heated O2 sensor inoperative 3 Lambda control inoperative 4 Air injection inoperative 5 Exhaust gas recirculation inoperative 6 Idle speed control inoperative 7 Ignition system defective 8 Engine coolant temp. sensor, open/short circuit 9 Intake air temp. sensor, open/short circuit 10 Voltage at hot wire mass air flow sensor too high/low 11 TN-signal (rpm) at engine control module (N3/4) defective 12 Heated O2 sensor heater, open/short circuit 15 Wide open throttle information defective |
#3
|
|||
|
|||
This exactly what I need. Only its probably diferent for my car. Where didi you get this info from ?
Dmitry |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil Additives | Bill Wood | Mercedes-Benz Performance Paddock | 6 | 08-24-2011 10:53 AM |
'94 C280 - Intermittent No-Start & Uncommanded Engine Shutdown | jgl1 | Tech Help | 21 | 05-18-2009 01:01 PM |
1969/70 W108, 280S, Incorrect Engine? Busted the distributor. | Ted_Grevers | Tech Help | 1 | 08-30-2004 09:02 PM |
3.2l 24v 300ce Engine In 190e | sisco2gs | Mercedes-Benz Performance Paddock | 12 | 06-12-2002 01:03 PM |