Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 09-22-2000, 03:44 PM
Posts: n/a
I have 1981 280SE. I've been trying to adjust the time of speed change at A/T. Starting from 0 Km/h, with medium acceleration, it changes for second speed at about 5 km/h. Full gas it goes to aprox. 20 km/h and then changes very . At 90 km/h it reduces to 3rd only with kickdown. And at 60 km/h in 3rd it reduces to 2nd only with kickdown. I've tryed to adjust the linkage of accelerator and the vacuum modulator without success. Are there any chart of changing speeds for this trans and a procedure to adjusts the linkage/modulator? Any help will be wellcome.
TIA Paulo
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How difficult is it to change to manual from an automatic ? kamil Diesel Discussion 12 10-03-2004 10:29 PM
Power Steering Filter, where and how to change? BenzWagon Diesel Discussion 4 01-27-2003 04:24 PM
94 e320 valve cover gasket change observations neumann Tech Help 0 01-05-2003 11:53 PM
To change or not to change? dpetryk Tech Help 8 09-28-2001 12:32 PM
mercedes 280 SE 116 body Automatic 1980 cumined Tech Help 0 04-01-2001 08:35 AM

All times are GMT -4. The time now is 07:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page