Hello all,
I have 2 new front brake discs that I got from this site. The car was vibrating quite a bit in the front end when braking, and the abs was reacting to the vibration. When I removed the wheels, I found that both discs had 2 low spots each. The spots are located directly opposite each other across the diameter of the wheel. Did I get a bad set of discs, or is there some other problem or adjustment I have wrong? Thanks, Darren McLaughlin |
I will call and speak to you on this subject. I would think that there is a problem where the rotor contacts the hub.
------------------ Benzmac: Donnie Drummonds 300E ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
All times are GMT -4. The time now is 01:40 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website