My old rack damper is to weak to stop the shaking at idle. I got the replacement bolt today it is part # 000 074 26 74. It is much shorter than the one on my car now. I have to screw the new one all the way in (without the lock nut) to even touch the throttle control on the injector pump. I have checked all the measurments on the throttle linkage and it seems to be OK. If I remove the linkage and let the throttle control come up to the rack damper bolt the idle is too low. If anybody has any idea what my problem is I would sure appreciate it. The MB engine manual does not cover this. Is there more than one style of rack damper replacement bolt?
Bill Ricker ------------------ 79 300 SD |
If the part is not the same, it would seem to me that you got the wrong part.
P E H |
All times are GMT -4. The time now is 07:20 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website