hey, on my 300d the rear armrest is stuck in the down position because it is caught below these notches on both sides that are metal and stick out, i have no idea on how to get past them, any ideas?
|
Not sure if it will work on yours, but can give it a try....
Slide your hand under the armrest, head-on. Tilt the rear of the armrest up and you should have a screw visible on both sides of the track. Remove these screws and slide the armrest out of the way (up). You can now put the slides back on track. Hope this helps, or at least gets you started ------------------ William 76 240D (W115) - 550K miles 78 300D (W123) - 200K+ miles |
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by WmHarlow:
Not sure if it will work on yours, but can give it a try.... Slide your hand under the armrest, head-on. Tilt the rear of the armrest up and you should have a screw visible on both sides of the track. Remove these screws and slide the armrest out of the way (up). You can now put the slides back on track. Hope this helps, or at least gets you started <HR></BLOCKQUOTE> hey , i'm not quite following here, what kind of screws are they? thx |
Will respond by email...
------------------ William 76 240D (W115) - 550K miles 78 300D (W123) - 200K+ miles |
All times are GMT -4. The time now is 11:57 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website